Scan, Verify, Organize and Upload to Google Docs using your Scanjet

ScanDrop works with all HP Scanjet scanners that support the Twain interface. Other than installing and configuring the software that came with your scanner, you don't need to perform any additional steps to make ScanDrop work with your Scanjet scanner.

Supported Scanjet Scanners

ScanDrop supports the following HP Scanjet scanners. If your scanner is not included here but supports the Twain interface, ScanDrop most likely will work with your scanner.

• HP ScanJet 2200C
• HP ScanJet 2400
• HP ScanJet 3800
• HP ScanJet 4600
• HP Scanjet 5000 Sheet-feed Scanner
• HP ScanJet 5470C
• HP ScanJet 5550
• HP Scanjet 5590 Digital Flatbed Scanner series
• HP Scanjet N6010 Document Sheet-feed Scanner
• HP Scanjet N6310 Document Flatbed Scanner
• HP Scanjet N6350 Networked Document Flatbed Scanner
• HP Scanjet 7000 Sheet-feed Scanner
• HP ScanJet 7400C
• HP Scanjet N7710 Document Sheet-feed Scanner
• HP ScanJet 8250
• HP Scanjet 8270 Document Flatbed Scanner
• HP Scanjet 8300 Professional Image Scanner
• HP Scanjet N8420 Document Flatbed Scanner
• HP Scanjet N8460 Document Flatbed Scanner
• HP ScanJet 8890
• HP Scanjet N9120 Document Flatbed Scanner

Using your Scanjet with ScanDrop

Before you get started, ensure that the software that came with your ScanJet Scanner is installed and you are able to scan documents with it. To verify that your scanner is working, insert few paper documents into your scanner tray and press the scan button. If the documents are scanned then your scanner is working. If not, please refer to scanner documentation to ensure that you followed all steps when installing the software and that the scanner is connected to your computer.

Step 1: Selecting the Scanjet scanner to work with ScanDrop

Ensure that ScanDrop is started. If it prompted you to login, do so. Then, click the Settings button as shown in below to display the settings screen.

Step 2: Select the scanner

If your scanner has been installed and is working, it will be displayed in the Default scanner list. Select the scanner from this list. If you need to make any other changes to the configuration, please do so and click Apply.

Your Scanjet scanner is now configured to work with ScanDrop. Place documents to be scanned in the scanner and press the Scan button in ScanDrop to start scanning.