Scan, Verify, Organize and Upload to Google Docs, Evernote and OfficeDrop using your Fujitsu fi Scanner

ScanDrop works with all Fujitsu fi Series scanners that support the Twain interface. Other than installing and configuring the software that came with your scanner, you don't need to perform any additional steps to make ScanDrop work with your Fujitsu fi Series scanner and begin uploading scans to Google Docs, Evernote and OfficeDrop Online.

Supported Fujitsu fi Series Scanners

ScanDrop supports the following Fujitsu fi Series scanners. If your scanner is not included here but supports the Twain interface, ScanDrop most likely will work with your scanner.

• Fujitsu fi-60F
• Fujitsu fi-4120Cdj
• Fujitsu fi-4220Cdj
• Fujitsu fi-4340C
• Fujitsu fi-5015c
• Fujitsu fi-5110C
• Fujitsu fi-5120Cdj
• Fujitsu fi-5220Cdj
• Fujitsu fi-5530C2
• Fujitsu fi-5750Cdj
• Fujitsu fi-5900c
• Fujitsu fi-60F A6
• Fujitsu fi-6130
• Fujitsu fi-6140
• Fujitsu fi-6230
• Fujitsu fi-6240
• Fujitsu fi-6670
• Fujitsu fi-6770
• Fujitsu fi-6800
• Fujitsu Scan Partner 600C

Using your Fujitsu fi Series Scanner with ScanDrop

Before you get started, ensure that the software that came with your Fujitsu fi Series Scanner is installed and you are able to scan documents with it. To verify that your scanner is working, insert few paper documents into your scanner tray and press the scan button. If the documents are scanned then your scanner is working. If not, please refer to scanner documentation to ensure that you followed all steps when installing the software and that the scanner is connected to your computer.

Step 1: Selecting the Fujitsu fi Series scanner to work with ScanDrop

Ensure that ScanDrop is started. If it prompted you to login, do so. Then, click the Settings button as shown in below to display the settings screen.

Step 2: Select the scanner

If your scanner has been installed and is working, it will be displayed in the Default scanner list. Select the scanner from this list. If you need to make any other changes to the configuration, please do so and click Apply.

Your Fujitsu fi Series scanner is now configured to work with ScanDrop. Place documents to be scanned in the scanner and press the Scan button in ScanDrop to start scanning.